Tuesday, April 7, 2009

CELLPHONE OPERATED ROBOT














220 comments:

«Oldest   ‹Older   201 – 220 of 220
Akash Islam said...

Hi I am a student and I am working with this project. But i can not decode DTMF signal. Because when i cut headphone wire I see that there are three colored wire GOLDEN, BLUE and RED. can not identify the RING and TIP wire. Please Please Please give me some advice or circuit diagram that I can connect RING and TIP to MT8870 DTMF decoder IC. And also actually where I cut the headphone wire after MIC or before the MIC. Please Please Please give me some advice. I want to complete my project.
Please mail or contact me:
akash.cse.du@gmail.com
or
shaylakash@ymail.com

gaurav said...
This comment has been removed by the author.
gaurav said...

hey...

i noticed that in your ckt u did not connect the pin no. 5 and 6 to ground...however in efy circuit it is connected to ground........

Anonymous said...

sir i am working m project on cellphone operated land rover i can move front ,left.rgt.but if i press 8 i wont move backword..........

Anonymous said...

I need a Bill of material
if possible please mail it
hardnandu@gmail.com

akanksha said...

sir,what does yhis h and k stands for?

Anonymous said...

helo sir...
his blog is very much useful to the beginers like me..
can u please say how to make a wireless robot.
thank you sir..

Er. Manish said...

hi! plz tell me how can i check that my circuit is generating correct dtmf tone or not? means, what is the voltage level at the output of the cell phone?

Amey kamat said...

nice Project...i did it successfully.
Now trying to make a Spybot with a 3g mobile.

And guys d code is same as given above...

heloitsadi said...

Thanks Amey,
Do share you experience with new project using 3G.

Regards,
Aditya

Unknown said...

hi sir this kamal..can u plzz post me the data about ur project????it'll help me alottt so request you kindly to send it as early as possible...plzzz and also xplaination about how to make cicuit connections plzz.. my email id is kiran_sai1768@yahoo.com

Anonymous said...


hello sir,
plz post me the link to the detailed video of experimental procedure

Anonymous said...

can u please mail me the project report
jaszi.kamboj@gmail.com

Sanjeev said...

Hello I am Sanjeev, I want to know that which earphones and cellphones are here applicable. And How to connect earphone with 8870.

Pls help me m working on it.

Thanks

Ansh said...

Can we make this type of robot by an android application or say by nt fix a phn with robot??

Ansh said...

Can I knw that this robot will work by an android application?? How??

Unknown said...

hi,
i'm working on a project of call based home appliance control. I'm using IC MT8870DE need some help in getting the output.

Unknown said...

Please can you mail me the LCD program for cellphone operated land rover.
My mail id is
maratheakshay.96@gmail.com

MyroboStation said...

These limits can cope with the use of a mobile phone for robotic control. There is no interruption to the service provider's area of area, other restrictions on interference and twelve regulations. It provides the benefits of strong controls.

Unknown said...

Thanks for sharing the piece of information, I am suggesting you the best Robotics camps in Lucknow, here MondaTech Robotics is the best robotics training in Lucknow. The services offered by Mondatech Robotics are :

Robotics classes for kids in Lucknow
Lego robotics training in Lucknow
Drone photography in Lucknow
International Artificial intelligence robotics classes in Lucknow
Police drone training
Aerial photography services in Lucknow

«Oldest ‹Older   201 – 220 of 220   Newer› Newest»